How to hang curtains with command hooks?

There’s no need to put holes in your walls to enjoy the beauty and function of curtains. Command™ Hooks are perfect for hanging curtains without damaging your walls. All you need is some clear tape and a few minutes, and you’ll be enjoying your new curtains in no time!

1. Choose your desired location for the curtains and mark the wall accordingly.

2. Make sure the hooks you select can support the weight of your curtains.

3. evenly spaced along the top of the curtain, mount the hooks into the marked wall.

4. Gently place the curtain onto the hooks.

5. Adjust the hooks as necessary to ensure the curtains are level.

Can you use command hooks to hang curtains?

Command™ Refill Strips make it easy to reuse your Command™ products! Just apply a Refill Strip to the back of your product, and you can remove, move, and reuse it again and again! They work great for installing curtain rods or hanging wall décor, coats, and bags!

If you are looking for the best way to hang your curtains, look no further than command hooks! With just a few simple steps, you can have your curtains up in no time. First, place the command hook against the wall where you want it to go. Then, trace the top, bottom, and side edges with a pencil. Next, place all of the hooks 4 to 6 inches (10 to 15 cm) above the frame. Finally, keep 2 hooks 3 to 6 inches (76 to 152 cm) outside the frame, and 1 hook in the middle to ensure central loading of the weight.

How can I hang my curtains without drilling holes

There are a few ways you can hang curtains without drilling. One way is to use adhesive hooks or adhesive strips. Another way is to use magnetic curtain rods. And a third way is to use tension rod curtains inside window frames. All of these methods are easy to use and will give you the results you want.

Magnetic curtain rods are a great way to hang a curtain without drilling. They are easy to use and can be a great choice for hanging curtains over a metal door. Measure your window opening to determine what size curtains you need.

Can you hold up curtains with Command Strips?

If you’re hanging curtains with command hooks, be sure to wait at least an hour before hanging them up. This will allow the adhesive to bond properly and prevent the curtains from falling down.

These are great for hanging pictures, holiday decorations, and other light-weight items around the house. They are easy to use and remove, and won’t damage your walls.

Can Command hooks hold a lot of weight?

These command utility hooks are great for heavier items. They are strong and can hold up to 10lbs. With the damage-free command, you can hang items up to 15lbs.

Command Hooks are a versatile way to hang things in your home, office, or workspace. But did you know that they have different weight limits?

The lightest Command Hook can hold up to 450g, while the heaviest can hold up to 36kg! So whether you’re hanging a light item like a picture frame, or a heavier item like a coat rack, make sure to choose the right Command Hook for the job.

How do you keep command strips from falling down

Applying Command Strips can be tricky if the surface isn’t clean. Any dust, dirt, or residue can make it hard for the adhesive to form a strong bond. I recommend cleaning the area with a Magic Eraser, because it’s quick and easy, and will thoroughly clean most surfaces. After using the Magic Eraser, wipe the area with rubbing alcohol to leave it squeaky clean.

Hooks are one of the most simple and efficient ways to hang curtains without a rod. You can use them to easily and quickly hang your curtains without having to worry about a complicated installation.

Do no drill curtain rods work?

Yes, there are so many ways to hang curtains without the need to resort to a drill. Adhesive options like adhesive hooks or adhesive rods are good for lightweight curtains. If you need a curtain or shade to fit within a door or window frame, use a tension rod.

Before you start, make sure you have the right tools for the job. You’ll need a drill and drill bit, stud finder and level to hang them. If your rods or curtains are particularly heavy — or if you have to secure them to drywall — you may want wall anchors as well. You’ll also need a tape measure, pencil, ladder and, of course, your curtains.

Should you use wall anchors for curtains

If you’re installing a curtain rod in drywall, you’ll need to use plastic wall anchors to provide proper support. To install the anchors, first use your drill or screwdriver to attach the brackets to the wall. Then, use a hand tool to screw the anchors into the wall. This can be tricky, so having a hand tool ready makes the job much easier.

One way to hang heavy frames without destroying the walls is to use adhesive strips. Adhesive strips can hold a lot of weight and are easy to apply. Another way to hang heavy frames is to use press-in hooks. Press-in hooks are easy to use and can hold a lot of weight. Finally, you can use drywall anchor studs to hang heavy frames. Studs are the traditional way to hang heavy frames and are very strong.

Can you hang curtains without wall anchors?

If you’re planning on hanging a curtain rod in your home, it’s important to make sure that the brackets are properly secured. If there isn’t a stud behind the wall where you’ll be attaching the brackets, you’ll need to use a drywall anchor and a screw to reinforce the brackets. Without a drywall anchor, a screw won’t be able to hold the weight of your curtain rod, and your curtains could end up falling down.

If you’re using command strips on rough surfaces, they may not adhere properly and could come loose. It’s best to avoid using them on brick walls, textured wallpaper, concrete or timber.


1. Decide where you want to hang your curtains. Command hooks work best on smooth, hard surfaces, like walls and doors.

2. Choose the right size command hook for your curtains. If your curtains are particularly heavy, you may need to use multiple hooks.

3. Affix the command hooks to your chosen surface, following the package directions.

4. Hang your curtains on the hooks.

If you’re looking for an easy way to hang curtains without damaging your walls, then command hooks are the way to go. They’re strong and easy to use, and best of all, they won’t leave behind any sticky residue. Just be sure to follow the package directions carefully, and you’ll have your curtains up in no time.

Julia Brooks is an expert in home curtains. She has years of experience in helping people find the right curtains for their homes. She is passionate about helping her clients find the perfect color, pattern, and style that will bring out the best in their living spaces. Julia also enjoys giving interior design advice to help create a beautiful, warm atmosphere in any home.

Leave a Comment