Grommet curtains come in a variety of sizes to fit any window. The most common size is the 84-inch rod, which can be found at most retailers. If you have a larger window, you may need a longer rod, such as a 96-inch rod. To determine the size of rod you need, measure the width of your window and add 4 inches to allow for the grommets. For example, a window that is 36 inches wide would need a 40-inch rod.
The correct rod size for grommet curtains depends on the width of the window and the weight of the fabric. For a standard sized window, a rod that is 1.25 to 2 inches in diameter is typically sufficient. Heavier fabrics may require a larger diameter rod.
How do you measure for grommet curtain rods?
To measure grommet top curtains, start by measuring from where you’d like your rod installed to where you want the curtain to fall. Then, measure the grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is usually set down about 1″ from the top of the panel.
If you’re looking for an easy way to hang curtains, grommet curtains are a great option. They slide easily on and off tension rods, and you don’t have to worry about them being too heavy. Just make sure that the grommets and curtain rods are compatible in terms of size.
What size curtain rod diameter do I need
When choosing a curtain rod, you’ll want to consider the size of your window. For a more custom look, add 4-6 inches on each side to account for the hardware. This will give you a starting point for finding the perfect-sized curtain rod for your space.
Most all curtains come with grommets spaced on 12″ centers at the top/width of the curtain. This is to ensure that the curtains can be hung evenly and will look neat and tidy.
How wide should grommet curtains be for 72 inch window?
When choosing curtains for a 72 inch window, it is best to choose curtains with a finished width of at least 15 times the width of the window, but better are those with twice that width, or even three times the width for sheers. This will ensure that the curtains will properly cover the window and let in the desired amount of light.
This is a rubber grommet that has an inside diameter of 3/8 inches and a groove width of 1/4 inches. It is designed to fit into holes that are 5/8 inches in diameter.
How high do you hang 84 inch curtains with grommets?
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 825 inches.
If you want to keep the spacing even on an operable grommet drapery, you can set fixed spacing by tacking gimp braid, twill tape, cord or grosgrain ribbon on the back, below the grommets. That is a very easy solution and will keep the grommets evenly spaced when opened and closed.
How do you make grommet curtains look fuller
This would be a great way to add some fullness to your curtains without having to buy new ones! Simply cut some toilet paper rolls to about three inches in length, and thread them in between your existing curtains on the rod. Rehang your curtains and enjoy the new fuller look!
If you have eyelet curtains, you will need a metal curtain pole that is 28mm in diameter or slightly smaller. This will ensure that the curtains hang correctly and look neat and tidy.
How many inches should a curtain rod go past the window?
As a general rule of thumb, the standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be 4 to 10 inches. This will ensure that your drapes are open during the day, allowing for plenty of natural light to enter the room.
When hanging curtains, be sure to choose a rod length that is the window width plus 16 to 20 inches. This will ensure that the curtains have a full and finished look.
What is the most common grommet size
The most common size grommet is the #2, which has an interior diameter of 3/8″.
Grommet curtains are an excellent choice for draperies that you want to be able to open and close regularly. Their easy operation makes them a perfect fit for any window.
What is the difference between an eyelet and a grommet?
Grommets and eyelets are both types of holes used for a variety of purposes. Grommets are typically used for heavier duty materials and applications, and are usually larger in size. Eyelets are often used to finish off the opening for a drawstring casing, or as a professional-looking detail on a garment. Buttonholes can also serve the same purpose, but an eyelet may be a more refined option.
If you want to make sure your curtains cover the entire window, you would need to make sure the curtain rod is at least 20 inches larger than the original window size. In this case, the original window size is 48 inches, so the curtain rod would need to be at least 68 inches.
Final Words
A grommet curtain rod is typically a 1″ diameter curtain rod.
The size of the rod you will need for grommet curtains depends on the width of the window and the weight of the curtains. A wider window will need a stronger and thicker rod to support the weight of the curtains, while a smaller window can get away with a thinner rod.
