When it comes to outfitting your windows with treatments, there are a lot of things to consider. But perhaps one of the most important is how to measure for curtains and rods. With these simple steps, you can be sure that your curtains will look great and function properly.
To measure for curtains and rods, you will need a tape measure and a level. First, measure the width of the window at the top, middle, and bottom. Record the shortest measurement. This is your curtain width. Next, measure the height of the window at the left, middle, and right side. Record the longest measurement. This is your curtain height. Finally, using the tape measure and level, measure and mark the drilled holes for your curtain rod brackets.
How do I know what size curtain rod I need?
When measuring for a curtain rod, be sure to add 4-6 inches on each side of the window to account for hardware. This will give you a starting point to find the perfect sized curtain rod for your space. Custom curtain rods can add a unique look to any window.
When choosing the width of your curtains, you should take into account the overall look you are going for. If you want a more dramatic look, then you will want to choose curtains that are 2-25 times the width of your window/rod. This will ensure that the panels look ample when closed. However, if you are looking for a more subtle look, then you can choose curtains that are only 2 times the width of your window/rod.
How do I calculate how many curtains I need
If you want to achieve a luxurious look for your curtains, you should multiply the width of your window by 25 to 3. This will give you the number of panels you need.
To find the right curtain length, measure from the floor to where you’ll hang the rod (usually 4 to 6 inches above the window frame). Otherwise, hanging the curtain rod just below the ceiling is a simple design trick that makes your ceilings appear taller. Curtains come in standard lengths like 63, 84, and 96 inches.
How far should curtain rod extend past window?
The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be 4 to 10 inches. This allows the drapes to be open during the day and still provide some privacy.
If you want your window to look bigger, and your curtains to look more high-end, you should hang your curtain rod higher than the window, almost to the ceiling. This will require curtains that are longer than your typical curtain.
Do you double the width for curtains?
This rule is a good guideline to follow when hanging curtains. If your curtains are too narrow, they will not look full and lush. Curtains that are too wide will overwhelm the window and look out of proportion.
When it comes to curtains, the wider the better! For a 60 inch window, you need curtains with a finished width at least 15 times that, but better are those with twice that width and even three times the width for sheers. This will give your window the added coverage and privacy you desire, while also making a bold statement in your home.
What comes first width or drop in curtains
When we list or write curtain measurements, the width always comes before the drop. Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches).
When it comes to how high to hang your curtain rod, a good rule of thumb is 2/3 of the distance between the top of the window and the ceiling. This creates the illusion of height. In rooms with standard 8′ ceilings, that can mean mounting the rod at the ceiling, which is perfectly fine!
What is the rule for curtains?
There are a couple reasons for this: Firstly, it adds the illusion of height to the room; secondly, it allows more light into the room, as the curtains aren’t blocking the entire window.
If you’re looking for a full and finished look, be sure to choose a rod length that is the window width plus 16 to 20 inches. For example, if the window width is 48 inches, the rod length will be 64 to 68 inches. This will ensure that your curtain panels are properly sized for the window.
What size curtain rod for a 72 inch window
If you want to hang curtains that are 20 inches wider than the original window size, you would need to purchase a curtain rod that is 68 inches long.
There are two standard lengths for curtains when you buy them in stores or online: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.
How many brackets do you need for curtains?
If you have a standard window, you will need at least two curtain rod brackets. One for the left corner, and one for the right corner. Generally speaking, you should add an additional center support bracket every 30-36 inches if you have an expansive window. This will help to evenly distribute the weight of the curtains, and make sure that your window treatment lasts for a long time.
There are a few things to consider when deciding if curtains should touch the floor. First, think about the style of your home and what look you are trying to achieve. If you have a more formal setting, thenfloor-length curtains may be the way to go. However, if you’re going for a more relaxed vibe, then curtains that stop just above the windowsill may be better suited for your space.
Another thing to keep in mind is the function of your curtains. If you’re looking for curtains that will provide privacy and block out light, then you’ll want to make sure they touch the floor. This way, no light will be able to peek through the bottom of the curtains. On the other hand, if you’re simply using curtains for decoration, then it’s really up to you how long you want them to be.
So, when it comes to curtains, it really depends on your personal style and the function you’re looking for. If you want a more formal look, go for floor-length curtains. However, if you’re going for a more relaxed vibe, then shorter curtains may be the way to go. And, if you’re looking for curtains that will provide privacy and block out light, make sure they touch
Warp Up
There are a few things you need to consider when measuring for curtains and rods. First, you need to decide how high you want the curtains to hang. Second, you need to decide how wide you want the curtains to be. Third, you need to determine the type of curtain rod you want to use. Finally, you need to take into account the type of window treatment you want.
Assuming you have decided on the style of curtains and rods you want, measuring for curtains and rods is a relatively easy process. To measure for curtains, you will need to measure the width of the window from one end to the other. For rods, you will need to measure the width of the window, as well as the distance from the top of the window to the point where you would like the curtains to hang.
