Blackout curtains are a must-have for any light-sensitive sleeper, but how do you know which size to buy? Measuring blackout curtains is a simple process that requires only a tape measure and a few minutes of your time.
To measure blackout curtains, you will need a tape measure and a friend or family member to help. First, find the width of your window and add 6 inches to accommodate the rod. Next, measure the length of your window from the top of the frame to the bottom. Add 12 inches to this measurement to allow for the curtain to bunch at the bottom. Lastly, measure the width of the fabric and multiply it by 2.5 to get the number of panels you will need.
How do you know what size blackout curtains to get?
If you are adding a blackout lining to your drape, you will need to add an additional 15-25% to the base width of the window to account for the finished drapery width. For example, if the base width of the window is 60 inches, the finished drape must be a minimum of 75 inches wide to expose the entire window when the drape is open.
To ensure that curtains look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
How are Blockout curtains measured
To determine the curtain length, measure from the top of the ceiling to the floor. This becomes your curtain length. Our track comes down 2″ if you don’t need 100% blackout.
To measure the width of your window for a blackout blind, start at the top of the window and measure the width at the top, middle, and bottom. Allow yourself an additional 3 inches on either side, as well as at the top and bottom, to allow for an overlap. This will be your width measurement. Note this measurement down and that’s it – measuring your window for a blackout blind is really that simple!
How much overlap do I need for blackout curtains?
To minimize light leakage, the blind should overlap the window opening by at least 2″ on each side for a total of 4″ on the entire width. 2) Fabric width: Measure the distance from the outermost point you would like the fabric to extend.
If you want your curtains to look full and proper, a common rule is to have the finished width of the curtains be at least 2 times the width of your window. This will give them a nice, full appearance.
How wide should curtains be for 60 inch window?
Curtains are a key element in any room design, and the width of those curtains can have a big impact on the overall look and feel of the space. When choosing curtains for a 60 inch window, you’ll want to look for curtains with a finished width at least 15 times that, but better are those with twice that width and even three times the width for sheers. This will ensure that your curtains have a full, luxurious look that will really make your window stand out.
There are a lot of different ways that you can hang curtains, but if you want them to look their best, I always recommend hanging them high and wide. That means you want to mount your rod high above your window casing (this often means close to the ceiling) and 8”-12” beyond the window casing on each side.
Should blackout curtains touch the floor
There is no definitive answer to this question, as it depends on personal preferences and the overall style of the room. However, most people tend to prefer curtains that touch the floor, as it gives the illusion of a taller window and makes the room look more elegant. If you are unsure, it is always best to consult with a professional interior designer to get the best advice for your specific situation.
If you have a large room with high ceilings, dark colored curtains can help to make the space feel more cozy and intimate. Using a dark color on the curtains can also help to anchor the space and give it a more unified look. If you are using dark curtains, you may want to repeat the color somewhere else in the room to help tie the look together.
What size is 90 by 90 in curtains?
If you are looking for curtains that are 90 inches wide and 90 inches long, this is the collection for you. All of the curtains in this collection are the same size, and we sell them in pairs. Keep in mind that the listed size is for each individual curtain, so you will receive two curtains when you purchase from this collection.
Assuming you want a fullness of 25%:
First, multiply the track/pole width by your chosen fullness (eg Pole width 150cm x 25 = 375).
Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 273).
Then, round that up to the closest whole number to calculate how many widths you need (3).
What is the difference between blackout and Blockout curtains
While blackouts and blockout curtains may seem similar, there is one key difference between the two. Blackouts are total blockout curtains, meaning they block out 100% of light. Blockout curtains, on the other hand, only offer about 99% blockout, so there is still a small amount of light that can pass through.
In order to choose a rod length that will give your curtains a full and finished look, you should add 16 to 20 inches to the width of your window. For example, if the width of your window is 48 inches, the rod length should be 64 to 68 inches. Keep in mind that you will need to measure for your curtain panels based on the full rod length, not just the window itself, in order to get the look you desire.
How is curtain width measured?
To measure the width of a curtain, you need to measure the horizontal part of the curtain from left to right. Most curtains and drapes need to be at least two to three times wider than the window in order to give a full appearance when hanging.
When we list or write curtain measurements, the width always comes before the drop. Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches).
Conclusion
To measure blackout curtains, you will need a measuring tape and a piece of paper.Mark the top and bottom of the window on the paper. Then, measure the distance between the top and bottom marks. This is the height of the window. Next, measure the width of the window at the top, middle, and bottom. Use the largest width measurement. This is the width of the window. Finally, measure the length of the curtain rod. Add 6 inches to this measurement to account for the curtains hanging over the sides of the rod. This is the width of the curtains.
Blackout curtains are a great way to measure light and reduce noise in your home. There are a few things to consider when measuring blackout curtains. First, determine the size of the window. Second, measure the length of the curtain. Third, measure the width of the curtain. Finally, take all of these measurements into account when ordering your blackout curtains.
