Assuming you want to make the curtains longer without sewing:
If your curtains are too short and you don’t want to hem them, you can alter them without sewing. One way to do this is to add lace or fabric to the bottom. You can either glue or sew the lace or fabric on. Another way to make your curtains longer is to add a strip of fabric to the top. You can attach the strip of fabric with tape or glue.
There are a few ways to alter curtains without sewing, depending on the type of fabric and the desired look. For example, if the fabric is sheer, you can use fraycheck or clear nail polish to seal the edges. For a more gathered look, you can use a fabric adhesive or hot glue. For a more finished look, you can use iron-on hem tape.
How can I fix long curtains without sewing?
To get sharp folds in your curtains, start by folding them in half lengthwise. Then fold in half again, and press with a warm iron. Next, lay bonding tape on the fold and pin into place. This tape is activated with heat, so when you iron it the fabric will stay in place. Finally, fold the bottom up to the desired length and press again.
It Once you are marked and measured you can cut your fabric Now i could have easily cut this on the cutting room floor but instead I took the time to cut it on the bias This is a little more time consuming but it gives the fabric a little more stretch and it drapes nicer when it is sewn into a garment Bias cutting is cutting the fabric at a 45 degree angle to the grain of the fabric
What can you do if your curtains are too long
1. Move the Rod: The easiest way to shorten curtains without hemming is to move the curtain rod. This will allow you to adjust the length of the curtains without having to alter them.
2. Tie Them Back: Install a tieback and blouse the excess curtain over the tie creating a swagged effect. This will give the illusion of shorter curtains without actually having to hem them.
3. Fuse or Glue: Pinch & pickup fake a valance. By attaching the top of the curtain to the rod with either glue or fusing, you can create the appearance of a shorter curtain.
4. Fake a Valance: Another way to create the illusion of shorter curtains is to fake a valance. This can be done by attaching a piece of fabric or ribbon to the rod at the point where you want the curtains to end.
Iron-on adhesive is a great way to attach blackout fabric to a curtain. Simply place straight pins along the backside of the curtain to hold the blackout fabric, iron-on adhesive, and curtain in place. Set your iron to the “wool” setting (as according to iron-on adhesive directions), press and hold the iron on the back side of the blackout fabric.
How do you shorten curtains without hemming them?
There are a few different ways that you can shorten drapes without having to hem them. One way is to fold up the bottom at one side of the drapes to the desired length. Then, hold your tape measure along the pinned-up side of the panel and press along the bottom of the panel to create a crisp edge, using a hot iron. Finally, remove the pins and set your iron to a medium-high temperature.
This is a great way to make sure your curtains are hung evenly and look great!
Can ready made curtains be altered?
Ready made curtains can be shortened to fit your window. We can also convert pencil pleat heading to eyelet and vice versa, depending on the length. The curtain makers start with a packet of ready-made curtains and alter these to your requirements.
Curtains are a great way to add privacy and style to your home, but they can sometimes be too long. If you have curtains that are too long, you can shorten them without cutting them off at the bottom. Here’s how:
1. Measure before you shorten. Hold a yardstick vertically so one end is on the floor and the other end touches the left edge of the curtain. Mark the desired length of the curtain with a pen or pencil.
2. Create the hem. Fold the bottom edge of the curtain up to the mark you made in Step 1. Iron the fold to create a clean, crisp hem.
3. Confirm the length. Hold the curtain up to a window to make sure it is the length you want. Adjust the length if necessary.
4. Hang the curtains. Hang your shortened curtains back up and enjoy your new, stylish look!
Can curtains be altered
Curtains and drapes are a great way to complement your room, but some are too long and need to be altered. Shortening drapes may be something you can do yourself or find a professional curtain hemming services nearby. You can also send it to us through our online tailoring services.
There are a few things to consider when deciding if curtains should touch the floor. The first is the overall style you are trying to achieve in your space. If you are going for a more formal look, then longer drapes that pool on the floor are a good option. If you want a more relaxed feel, then shorter drapes that end above the sill are a better choice.
The second thing to think about is how much light you want to let in. If you want to block out most of the light, then drapes that touch the floor will do a better job of that. If you want to let in more light, then shorter drapes are a better option.
The last thing to consider is practicality. If you have pets or kids, then you might want to choose drapes that are shorter so they don’t get damaged or dirty. If you have a lot of traffic in your home, then you might want to choose drapes that are longer so they don’t get damaged or dirty as easily.
Ultimately, the decision of whether or not to have curtains touch the floor is up to you and what you want for your space.
Is it better for curtains to be too short or too long?
If you want your curtains to look professional and perfect, follow the rule of choosing longer rather than shorter curtains. Standard curtain lengths are 84 inches, 96 inches, or 108 inches, but experts say that opting for the longer option will create a better overall look for your room.
If you have a short window, using curtains that are longer than the window can help make the window appear larger. The key is to choose a curtain length that is in proportion to the width and height of the window. For example, a window that is longer in length than width can benefit from longer curtains, which will give the window a larger feel.
How do you line already made curtains
If you want to line store-bought curtains, follow these steps:
1. Lay out the curtain on a flat surface.
2. Pin the blackout lining in place at the top of the curtain.
3. Sew the blackout lining to the curtain by stitching a single line across the top of the curtain.
There is no definitive answer to this question as different fabrics have different benefits. Some people prefer cotton for its natural breathability, while others find polyester to be more durable and wrinkle-resistant. Ultimately, it is up to the individual to decide what is best for their needs.
How do you join two pieces of fabric without sewing?
There are two great ways to attach fabric without sewing: fabric glue and a fusible bonding tape like Dritz Stitch Witchery. If you have a sewing machine, sewing is often still the fastest and most reliable method for many projects, but fabric glue or Stitch Witchery are great alternatives.
Overall, I would definitely use the double sided adhesive tape if I were to do this project again. My favorite part about using the peel & stick fabric tape is that it does not slip around while you work, unlike the iron on tape. You just press it into place and you’re done!
Warp Up
Cut the curtains to the desired length.
Fold the top of the curtain over to create a pocket for the rod.
Iron the fold to create a sharp crease.
Thread the rod through the pocket and hang the curtains.
If you’re not a fan of sewing or don’t know how to sew, don’t stress! There are a few ways to alter curtains without having to pick up a needle and thread. One way is to use adhesive hem tape. This tape adheres to fabric and creates a temporary bond that can last for several washes. Another way is to use fabric glue. This method is similar to using hem tape, but you will need to let the glue dry for a few hours before hanging the curtains.
