How much does it cost to have curtains hemmed?

If you’re not the DIY type, or don’t have a friend who can sew, you’ll need to take your curtains to a tailor or seamstress to have them hemmed. How much it will cost to have your curtains hemmed will depend on a few factors, including the material of the curtains, the size of the hem, and the number of curtains you need to have hemmed. In general, you can expect to pay anywhere from $10 to $50 to have your curtains hemmed.

There is no definitive answer to this question as the cost will depend on a number of factors, including the type and fabric of the curtains, the size of the hem, and the complexity of the design. However, as a general guide, you can expect to pay anywhere from $10 to $30 per panel for basic hemming.

Can a seamstress hem curtains?

If you have curtains or drapes that are too long, you can have them shortened by a professional curtain hemming service, or you can do it yourself. To shorten drapes yourself, first measure how much shorter you want them to be, then cut them to the desired length. Next, hem the bottom of the drapes by hand or with a sewing machine, using a straight stitch. Finally, hang the drapes back up and enjoy your newly altered curtains!

For the ends, I first fold the fabric all the way to the end at three and a half inches. Well, except for the 1/4 inch seam allowance, which I leave unfolded. This makes a nice, clean edge. Next, I fold the fabric in half so that the raw edges are now hidden. Once again, I make sure to leave the 1/4 inch seam allowance unfolded. Finally, I fold the fabric in half one more time. This time, I tuck in the 1/4 inch seam allowance so that it’s hidden. This gives you a nice, clean edge that’s ready to be sewn.

What is the hem allowance for curtains

Standard floor-length curtains should have a three to four-inch hem, plus another three to four inches for the double fold. Your curtains should then be six to eight inches longer than where you place your pins. This will allow your curtains to drape nicely and will also help to prevent them from blowing in the wind.

If you need to shorten your drapes, you can do so with iron-on fusible tape or fabric glue. The process for either option is straightforward, and you can do it in less than an hour. All you need are a few tools and supplies. With iron-on fusible tape, you just need to position the tape on the fabric and then iron it on. With fabric glue, you’ll need to apply the glue to both sides of the fabric and then press them together.

Do dry cleaners shorten curtains?

A skilled tailor can make a variety of changes to a pair of curtains, including shortening the length, widening or narrowing the sides, adding or removing panels, adding or lessening the pleats, making new rings in case of damage, relining or adding a new lining.

This is the easiest way to make sure your curtains are the right length. Just hang them up and then fold the bottoms under so they just barely touch the floor.

Can you hem curtains without cutting them?

There are a few ways to shorten curtains without cutting them. One way is to fold the hem up and sew a hem. This will create a double hem and will allow you to keep the fabric if you want to. Another way to shorten curtains is to use buttons as fasteners. This will allow you to fold the curtain up and still have it look nice.

It is recommended to wash your curtains before hemming or adjusting its height, as it may shrink after the first wash.

Can you shorten curtains without sewing

Iron-on hem tape is an easy way to hem curtains and other materials that don’t need to be washed often. The tape is made of a fabric like polyester that melts and bonds to the fabric when heated with an iron or steam, keeping the fabric together like a hem.

If you need to hem a skirt or dress, the average cost is $10-$14. If you need to take in or let out a skirt or pair of pants, the average cost is $15 (unlined) to $20 (lined) or $25 (with a zipper).

How do you hem store bought curtains?

To ensure your store-bought curtains fit your window perfectly, you’ll need to hem them. Here’s how:

1. Determine the new length for your drapes and mark it with a pin.

2. Un-hem the panels and partially open the bottom of each side hem to release the lining.

3. Using an iron, press the panel to remove the fold lines from the original hem.

4. Fold the bottom of the panel up to the new length you marked and press with the iron.

5. Sew a new hem in place.

There are a few things to keep in mind when deciding if your curtains should touch the floor. First, think about the overall style you want to create in your space. If you’re going for a more casual look, then falling just above or below the windowsill might be the way to go. But if you want a more formal look, then floor-length curtains are the way to go.

Another thing to consider is function. If you have pets or small children, you might want to avoid floor-length curtains that can easily be grabbed or pulled. And if you have windows that are close to the ground, you might want to consider shorter curtains so they don’t get dusty or dirty.

Ultimately, it’s up to you to decide what looks best in your space. But keep these things in mind when making your decision so you can find the perfect option for your home.

Is it better to have curtains too long or too short

If you’re looking for standard curtains, you’ll usually find them in three lengths: 84 inches, 96 inches, or 108 inches. However, experts generally recommend opting for longer curtains rather than shorter ones. There are a few reasons for this: first, longer curtains tend to create a more dramatic look, making them ideal for living rooms and bedrooms. Additionally, they provide more coverage and light control than shorter curtains, which can be important factors in rooms where you want to be able to adjust the level of light.

If you want to make your room look larger, go for high-hanging curtains with long vertical stripes. This will create the illusion of height and make the room appear bigger. However, if you want to make the room look smaller, go for short curtains with horizontal stripes. This will shorten your wall height and make the room appear smaller.

How do you shorten curtains when hanging?

If you need to shorten your curtains, follow these simple steps:

1. While the curtains are still hanging, fold the bottom of the curtains under to the desired length. Use the stick pins to hold, to keep it folded and in place.

2. Bring the curtain bottom up to the ironing board and iron a crease on the new fold.

3. Cut off excess curtain a couple of inches past the fold and remove the pins.

If you’re unsure about whether your window coverings are safe to wash, it’s always best to play it safe and opt for dry cleaning. This is especially true for curtains and drapes with stitched-in pleats, swags, or other elaborate ornamentation that may not withstand a washing.


There is no definitive answer to this question as the cost will vary depending on a number of factors, such as the type of fabric, the size of the curtains, and the complexity of the hem. However, as a general guide, you can expect to pay around $10-$15 per curtain panel.

The cost of having curtains hemmed can vary depending on the type of fabric and the size of the curtains. Generally, the cost ranges from $5 to $30 per curtain.

Julia Brooks is an expert in home curtains. She has years of experience in helping people find the right curtains for their homes. She is passionate about helping her clients find the perfect color, pattern, and style that will bring out the best in their living spaces. Julia also enjoys giving interior design advice to help create a beautiful, warm atmosphere in any home.

Leave a Comment