How many yards do you need to make curtains?

When it comes to making curtains, the amount of fabric you will need will depend on the size of the window and the fullness or gathered look you want. A general rule of thumb is to allow 1 to 1 1/2 yards of fabric per linear foot of window.

This depends on the size of the window and the desired fullness of the curtains. For an average sized window, you will need approximately 2 to 3 yards of fabric.

How do I calculate how much material I need for curtains?

If you need to know how much curtain fabric you need, there is a simple calculation you can follow. First, multiply the width of your track or pole by your chosen fullness (for example, if your pole width is 150cm and you want 25% fullness, that would be 150cm x 25 = 375). Next, divide that figure by the width of the fabric, which is typically 137cm (375 divided by 137 = 273). This will give you the number of metres of fabric you need to buy.

If you want your drapes to puddle up on the floor a bit, add extra length for that. From my curtain rod to the floor is about 96 inches. Add 10 inches (for seam and hem allowance + some shrinking from washing), plus 2 more inches for some slight puddling and I found 3 yards to be the perfect amount.

How many yards of fabric needed in making a simple 4 window curtains if the length per window is 54 inches

If you need to upholster a piece of furniture that is 10 feet long and 6 feet wide, you will need 1088 yards of upholstery material. This is because most upholstery material is 54 inches wide, and you will need four 272-yard lengths of it.

If you want to get an estimate for how many curtain panels you will need, you can divide the total width of your window by the width of a single curtain panel. However, if you want your curtains to have a full, luxurious look, you should multiply the width of your window by 25 to 3.

How many yards of fabric do I need?

To calculate the amount of fabric you need for a project, you will need to know the width of the fabric, the length of the fabric, and the size of the project.

The width of the fabric is the total number of pieces divided by the number of pieces that fit into the width. The length of the fabric is the number of needed rows multiplied by the length of one piece. The size of the project is the total project inches divided by 36 inches.

To figure out how much fabric you need for a project, you’ll need to know the width of the fabric and the length you need. For example, if you need 2 yards of fabric that is 36 inches wide, you will need 72 inches of fabric total.

How long does it take to make curtains?

If you are looking for a stationary panel, you will want your curtains to be a bit longer than they are wide. they should also be light in color and not too heavy. A good rule of thumb is for your curtains to break anywhere from a ¼” to ½” from the floor, similar to a break in pant legs on your shoe.

If you’re looking for the perfect curtain length, experts say you should always opt for a longer length rather than a shorter one. Standard curtains come in three lengths – 84 inches, 96 inches, or 108 inches – but choosing the right length can make or break a room. Professional designers follow one hard and fast rule in order to achieve the perfect dimensions: choose a curtain that is at least one and a half times the width of your window.

Do floor length curtains make a room look bigger

If you want to make your room look bigger, hanging curtains from the highest point of the wall is a great way to do it. The curtains will create a soft, subtle guide for the eye, making the room seem larger than it actually is.

When it comes to the standard distance from the window casing to the end of the curtain rod, it should be 4 to 10 inches on each side. This is to ensure that the drapes are able to be open during the day. Another thing to keep in mind is that the curtain rod should extend at least four inches on each side of the window’s inside frame.

How do you calculate curtain panels?

When measuring for new window panels, be sure to measure the width of the window opening from outside edge to outside edge of the window casing. Add 6″ to each side (12″ total) to account for the size of the panels. Take the total number (your measured width plus what you added to each side), and divide it by the number of panels you want to order to get the correct size for each panel.

When choosing ready-made curtains, it is important to measure the length of the rail or pole (between the finials), not the window. This measurement is the width of each curtain and means they’ll have a lovely, full gather even when closed. Most ready-made curtains come in these widths: 117cm (46”), 168cm (66”) or 228cm (90”).

How many curtain panels do I need for a 72 inch window

You will need two panels for a 72 inch window. The panels should be at least 15 times the width of the window, but it is better to have panels that are twice or even three times the width of the window. This will allow for a more luxurious gather.

One panel curtains are most commonly hung in pairs, though they can also be hung in sets of three. They often include a swag or valance below the top edge of each panel, as well as valance extensions above each panel’s bottom edge. This gives them a more finished look, and helps to block out light and noise more effectively.

Should curtains touch floor?

There is no definitive answer to this question – it depends on your personal preferences and the look you are trying to achieve in your home. If you want a more formal look, then floor-length curtains are a good option. If you prefer a more relaxed style, then shorter curtains that stop above the windowsill may be a better choice. Ultimately, it is up to you to decide what looks best in your home.

There are so many fun things you can do with a few yards of fabric! You can use it to cover a headboard, add some colorful pillows, perk up your place settings with fun napkins, or dress up your table with a runner. You can even frame your windows and doors with fabric to add a little extra flair to your home.


The amount of fabric needed to make curtains depends on the size of the window and the fullness desired. For a general guide, you will need:

– For a small window (up to 36″ wide), 1 to 1 1/2 yards of fabric

– For a medium window (36″ to 60″ wide), 2 to 2 1/2 yards of fabric

– For a large window (over 60″ wide), 3 to 4 yards of fabric

After doing some research, it seems that the average person needs about 10 yards of fabric to make a set of curtains. Of course, this can vary depending on the size and style of the curtains. For example, if you’re making curtains for a large window, you may need more fabric. If you’re making simple, small curtains, you may need less.

Julia Brooks is an expert in home curtains. She has years of experience in helping people find the right curtains for their homes. She is passionate about helping her clients find the perfect color, pattern, and style that will bring out the best in their living spaces. Julia also enjoys giving interior design advice to help create a beautiful, warm atmosphere in any home.

Leave a Comment