When it comes to curtains, the width of the fabric you use will depend on the size of the window. For a standard-sized window, you will need about two widths of fabric. If you have a larger window, you may need three widths of fabric.
To make curtains, you will need twice the width of the window plus 6 inches (15 cm) for hems and seam allowances.
How many curtain widths do I need?
This is a basic guide for choosing the right curtains for your window. The rule of thumb is that the curtains should be at least twice the width of the window, if not more, to achieve a look of proper fullness. For example, if your window measures 36″ wide, you would need curtains that would give a minimum width of 72″.
The average width of a curtain fabric is 137 cm. Some fabrics are wider and some are narrower, so it is important to check the width of the fabric before purchasing.
How many widths of fabric do I need for pinch pleat curtains
Pinch pleat curtains are a type of curtain that features pleats that are gathered up tightly, resulting in a fuller look. This style of curtain requires more fabric to sew in the pleats, so you will need 25x the track width or 150% fullness.
When choosing curtain panels, it is important to ensure that they will look ample when closed. To do this, the panels should have a combined width that is 2 to 25 times the width of the window/rod. This means that if you are ordering Grommet style or Rod-pocket style panels, the total drapery width should be at least 2 times the window/rod width.
How do I calculate how much fabric I need for curtains?
If you need to know how much curtain fabric you will need, there is a simple calculation you can follow. First, multiply the track or pole width by your chosen fullness (for example, if the pole width is 150cm and you choose a fullness of 25, that would be 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 would be 273).
To get an idea of how wide your curtains should be, measure the width of your window and multiply it by 2-3. For a 60 inch window, you need curtains with a finished width of at least 120-180 inches. Sheers or lighter curtains can be 3 times the width of the window.
Should curtain lining be same width as curtain?
If you are looking for a lining for your curtain, you should generally order a size that corresponds to your curtain size. However, it is important to note that ready-made linings are typically shorter than standard curtain sizes. For example, if you purchase curtains that are 46″ wide x 54″ long, the lining that you receive will likely be 46″ wide x 51″ long.
If you are hanging drapes on a window, the standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be 4 to 10 inches. This will ensure that the drapes are open during the day and that the curtain rod extends at least four inches on each side of the window’s inside frame.
How many widths of fabric do I need for triple pleat curtains
To pleat a curtain, you will need to measure out the desired width and length of the curtain. Then, mark 5 pleats evenly spaced out across the width of the curtain. Each pleat should be approximately 15-20cm wide, and the spaces between each pleat should be 10-15cm wide. Finally, sew the pleats in place and hang the curtain up.
This ratio ensures that the curtains will look full and luxurious, without being too heavy or cumbersome. Too few pleats will result in a less full appearance, while too many pleats will make the curtains difficult to open and close.
How do you calculate pinch pleats for curtains?
Carolina Custom Draperies has a great tip for getting the perfect fullness for your pleated drapes: simply multiply the total width by 25! So, if your window width is 84 inches, you’ll need 210 inches of fabric. Easy peasy!
If your window is 48 inches wide, you should get a curtain that is at least 60 inches wide. If you want to have two panels, each panel should be at least 30 inches wide.
How wide should curtains be for 100 inch window
If you’re looking for an inside-mount curtain, you’ll want to measure from one edge inside the frame to the inside edge on the opposite side. For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position.
The width of the material you will need for your window treatments will depend on the width of the window itself. A good rule of thumb is 1 WOM (width of material) for up to a 48” wide window, 1-1/2 WOM for windows 47” to 96” wide and 2 WOM for windows over 8 feet. Of course, if the drapery panels are operable, the required widths of material is calculated so that the panels fully cover the window when closed.
How much fabric do I need to drape a wall?
If you’re making drapes or swags, you’ll need about 130% of the length and width of the area you’re covering. So, for example, if you’re covering an area that’s 10 feet long and 10 feet wide, you’ll need 13 feet of fabric for each dimension.
If you’re hanging your curtains from a rod, you’ll want to make sure they’re long enough to pool slightly on the floor. Standard floor-length curtains should have a three to four-inch hem, plus another three to four inches for the double fold. Your curtains should then be six to eight inches longer than where you place your pins. This will give your room a luxurious feeling and help to soften the look of your windows.
Final Words
To make curtains, you will need at least 2 widths of fabric.
There are a variety of widths available for fabric curtains, but the most common widths are 45 inches, 54 inches, and 72 inches. For a standard window, 45 inches is usually sufficient, but for a larger window, 54 inches or 72 inches may be necessary.
